CAR90U
90 Watt automobile power adapter
- Wide input voltage range 11-32V
- Ultra compact and lightweight car adapter
- 90 Watt continuous output power
- All output voltages and currents can be configured via the multiple connector system (MCS)
- Worldwide approvals
- High safety standards
- Individual output connector on request
- For use in cars and trucks
你需要更多的信息吗?
产品数据表 CAR90U
Specification
Input | |
---|---|
Voltage range | 11.00 - 32.00VDC |
Switch off voltage | 10.00VDC |
Standby current | Typical 40mA @ 11.00V input Typical 80mA @ 32.00V input |
Input fuse | 12.00A (in CLP) |
Protection | Reverse polarity (input fuse CLP), Under voltage protection Over temperature protection (latch-off reset) |
Output | |
---|---|
Voltage range | 5.00 - 24.00VDC nominal |
Power | 90.00W cont. |
Initial set tolerance | ±3% max. |
Load regulation | - 80mV max. / A |
Line regulation | ±1% max. |
Ripple & noise | < 0.20V pk-pk |
Current limit | Constant current, 6.00A max. |
Protection | Short circuit |
Environmental | |
---|---|
Cooling | Convection cooled |
Temperature | Operating: -20°C to 40°C Non-operating: -40°C to 85°C |
Pressure & altitude | Operating: 1200hPa to 795hPa (max. 2000m above sea level) |
Humidity | 5 to 95% r.H., non condensing |
General | |
---|---|
Input connector | Cigarette lighter adapter (CLP) |
Output connector | Customer-specific with multi connector system (MCS) |
Efficiency | typical 96% at 100% load |
MTBF | >20000h @ 25°C ambient temperature and GB per MIL-HDBK217F |
Green procurement | WEEE, RoHS |
Indicator green LED | On: Power on |
Ingress protection rating | IEC60529, IP40 |
Regulatory approvals | Europe | CE |
International | CB Report IEC60950-1 | |
USA & Canada | cULus UL60950-1 | |
Australia & New Zealand | RCM | |
Electromagnetic emissions | Europe | EN55022 class B, EN55024 |
USA & Canada | FCC15 class B | |
Electromagnetic immunity | ESD immunity | IEC61000-4-2, 4kV contact / 8kV air |
Electromagnetic field immunity | IEC61000-4-3, 80-2700MHz, 3V/m, AM 80%/1kHz | |
Electrical fast transient/burst immunity test | IEC61000-4-4, +/-1kV, 5/50ns | |
ISO-Impulses | ISO7637-2, pulses 1, 2a, 2b, 3a, 3b, 4 |
- Other approvals on request
Housing dimensions (LxWxH) | 115.00 x 53.70 x 21.50mm, without cables and connectors |
Input cable length | 100cm ±5% |
Output cable length | 100cm ±5% |
Weight | 250g, without cables and connectors |